Variable Frequency Adjustable Speed Three Phase Asynchronous Motor

Variable Frequency Adjustable Speed Three Phase Asynchronous Motor

Solution Description:

      YVF2 collection variable frequency pace three-section asynchronous motor is a variable frequency speed a few-stage asynchronous motor with frequency converter as electrical power provide. By modifying the frequency of energy source, the velocity of motor can be altered easily to save energy and manage automation.
       
      YVF2 series motors have greater performance, extensive speed assortment, high precision, steady procedure and practical routine maintenance. Its set up measurement meets the IEC common, and its shell security stage is IP54. The motor has an external enthusiast cooler. The motor quota is a continuous quota based mostly on the ongoing doing work program S1. The rated voltage is 380V F-class insulation, rated frequency is 50HZ motor can continually alter pace in the assortment of three-100HZ, 3-50HZ is consistent torque procedure, fifty-100HZ is consistent power procedure. If the highest torque is greater than the price in the desk or the seat variety of YVF2-160M or beneath does not require an external supporter cooler (decrease power use), it need to be noted in the order.
 

Product Title variable frequency adjustable pace a few stage asynchronous motor
Motor Variety DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT machinery)
series TPYM collection
Operating velocity  Constant Velocity /Reduced Speed /Alter Velocity /High Speed Other 
Rated voltage: 380V
Rated power .seventy five ~ 315KW
Reference frequency 50Hz
Cooling mode IC411
Insulation course F
Security amount IP54 or IP55
Altitude no much more than one thousand meters
Link 3kW and beneath for Y relationship, 4kW and previously mentioned for delta link.
Basic composition forms B3, B5, B35, B14, B34
Software YVF2 sequence motors are ideal for driving rolling, lifting, transportation, equipment instruments, printing and dyeing, papermaking, chemical market, textile, pharmaceutical and other mechanical equipment necessitating steady and regular good and adverse inversion, and can be employed in conjunction with different frequency conversion power supply at property and abroad.
Routine maintenance approach Expert motor servicing middle motor maintenance procedure: cleansing stator and rotor – changing carbon brush or other parts – vacuum F pressure dipping paint – drying – Calibration stability.
one. Use environment should be always dry, motor area should be kept thoroughly clean, air ingestion must not be hindered by dust, fibers and other road blocks.
two. When the thermal safety of the motor carries on to operate, it should be ascertained whether or not the fault will come from the motor or the overload or the location worth of the protecting device is too lower. Following getting rid of the fault, it can be put into operation.
3, make sure that the motor is effectively lubricated for the duration of procedure. The common motor operates for about 5000 several hours, that is to say, lubricating grease should be included or changed. When bearing overheating or lubricating deterioration is located in procedure, the hydraulic force must modify lubricating grease in time. When replacing grease, the outdated grease must be removed, and the oil groove of bearing and bearing include should be washed with gasoline. Then ZL-3 lithium grease must be filled with 1/2 (two poles) and two/3 (4 poles, six poles and eight poles) of the cavity amongst the inner and outer rings of the bearing.
four. When the life of the bearing is in excess of, the vibration and sounds of the motor will increase certainly. When the radial clearance of the bearing reaches the subsequent worth, the bearing must be changed.
five, when removing the motor, it is Ok to get rid of the rotor from the shaft extension or the non extension conclude. If it is not needed to unload the supporter, it is much more practical to get out the rotor from the non-axle extension finish. When pulling out the rotor from the stator, the stator winding or insulation ought to be prevented from getting damaged.
six. When replacing the windings, the kind, measurement, turns and gauges of the first windings need to be recorded. When these data are dropped, they ought to be acquired from the maker and the authentic developed windings ought to be changed at will, which often deteriorates one or many functionality of the motor or even makes it unattainable to use them.

 

 

Variable Frequency Adjustable Speed Three Phase Asynchronous Motor